Инжекторна рейка AC W01 - 4 цил. 2 Ohm - комплект

Ref: 1201240350


Всички цени са крайни с включен данък добавена стойност където е приложимо. Разходите по доставката се заплащат от клиента.
Доставката е безплатна за суми над 1200 BGN с ДДС.(НЕ ВАЖИ ЗА ГАЗОВИ БУТИЛКИ!)
Срок на доставка: до 48 часа след получаване на плащане съобразно Общите условия.

Спецификации за Инжекторна рейка AC W01 - 4 цил. 2 Ohm - комплект

Производител/Марка AC Spolka/STAG
Брой цилиндри 4 цилиндъра
Време на отваряне/затваряне (ms) 2.1/1.5
Мощност на цилиндър (kW/HP) 13-33.8kW (17.5-45.8HP) при 1.2 bar
С включени дюзи да
Съпротивление на бобината (Ω) 2.0 Ohm
Тип инжектор рейка


AC injector rails are designed for autogas sequential injection systems in cars with internal combustion engines. They ensure the precise dosages of vaporized gas to the engine inlet and each cylinder.
The high durability of all the AC rails off has been confirmed in long-distance road tests for various makes of cars and various road and weather conditions.

The advanced materials used for the construction of AC injector rails provide higher durability and a faster response.


  • Stable operation.
  • Extended durability.
  • Unique technical solutions.
  • Service-free operation (no adjustments required).
  • Resistant to low temperatures.
  • 24-month warranty without mileage limit.


Additionally, the AC rails are provided with 2Ω coils to avoid the overloading of control systems. The coils have been equipped with IP67 rated connections.
The main component is a body made of anodized aluminum. The connections are made of brass and sealing is based on rubber compounds compatible with other elements. All materials comply with the strict requirements of Regulations 67 and 110.

Gas flow through section at 1.2 bar [l/min]150
Max. section performance at 1.2 bar pressure [kW/hps]39 / 53
Working temperature [˚C]-20 do +120
Maximum working pressure [kPa]450
Opening time / closing time [ms]2,4/ 1,7
Coil resistance
Suggested nozzle sizeØ 1,5; Ø 1,8; Ø 2,0; Ø 2,2; Ø 2,4; Ø 2,6
(can be drilled independently up to Ø 2.8 max.)
Gas inlet – pipe stub [mm]Ø 12
Gas outlet – pipe stub [mm]Ø 5
Overall dimensions 4 section [mm]150 x 84 x 66
Overall dimensions 3 section [mm]122 x 84 x 66
Service life [km] 
- in urban cycle100 000
- in extra urban cycle200 000
Weight [g]480